Table 319 Shutdown Command; Ies Service Cli Configuration Commands - Nokia 7302 Manual

Internet Enhanced Service

6.10 IES Service CLI Configuration Commands

The following commands are described:
•
•
•
•
•
•
•
•
•
•
6.10.1
6.10.1.1
Table 319
(1 of 2)
366
Generic Commands
IES Global Commands
IES QoS Policy Commands
IES Interface Commands
IES Interface DHCP Commands
IES Interface ICMP Commands
IPv6 Commands
IES SAP Filter and QoS Policy Commands
Show Commands
Clear Commands
Generic Commands
shutdown
shutdown command
Item Description
Syntax [no] shutdown
Context configure>service>ies
configure>service>ies>interface
configure>service>ies>interface>dhcp
configure>service>vprn>interface>ipv6>dhcp6-relay
configure>service>ies>interface>sap
Description This command administratively disables an entity. When disabled, an entity does not change,
reset, or remove any configuration settings or statistics. The operational state of the entity is
disabled as well as the operational state of any entities contained within. Many objects must
be shut down before they may be deleted.
Services are created in the administratively down (shutdown) state. When a no shutdown
command is entered, the service becomes administratively up and then tries to enter the
operationally up state. Default administrative states for services and service entities is
described below in Special Cases.
The no form of this command places the entity into an administratively enabled state.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13