Table 146 Egress Command; Table 147 Ingress Command; Egress - Nokia 7302 Manual

Intelligent services access manager/fttn/fx, fd 100/320gbps nt and fx nt ihub services
Hide thumbs Also See for 7302:
Table of Contents

Advertisement

FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
5.16.2.22
Table 146
5.16.2.23
Table 147
(1 of 2)
Issue: 13
Item
Description
Description
This command enables the use of the hash label on a VLL, or VPLS service bound to LDP
SDP.
When this feature is enabled, the ingress LER is modified so that the result of the hash on the
ingress packet header is communicated to the egress data path for use as index to select the
value of the label field of the hash label. The egress data path has a set of 128 different label
field values in the range 524.288 - 1.048.575. The egress data path appends the hash label at
the bottom of the stack (BoS) and sets the S-bit to 1 to indicate that.
The hash label, also referred to as entropy label, allows LSR nodes in a network to load
balance labeled packets in a more granular fashion than allowed by simply hashing on the
standard label stack. It also removes the need to have an LSR inspect the payload below the
label stack to check for an IPv4 or IPv6 header.
Since the ingress LER hashing routine maintains packet ordering within a conversation, this
guarantees that when an LSR sprays the packets over multiple LDP ECMP paths or multiple
paths over a LAG network port by hashing the extended label stack including the hash label,
the LSR will also maintain packet ordering within a conversation.Packets that are generated in
CPM and forwarded labeled within the context of a service (for example, OAM packets) must
also include a hash label at the BoS and set the S-bit accordingly.
The TTL of the hash label is set to a value of 1.
The no form of this command disables the use of the hash label.
Default
no hash-label

egress

egress command
Item
Description
Syntax
egress
Context
configure>service>vpls>mesh-sdp
configure>service>vpls>spoke-sdp
Description
This command configures the egress SDP context.
ingress
ingress command
Item
Description
Syntax
ingress
Context
configure>service>vpls>mesh-sdp
configure>service>vpls>spoke-sdp
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
265

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

73307360

Table of Contents