Nokia 7302 Manual page 70

Services Overview
7 If ccm-errors need not be propagated to the ring path (operational status),
8 Configure a control SAP (on a v-VPLS service) for the ring path with VLAN as
Below are the steps for unconfiguring a ring path:
1 Unconfigure the control SAP (as like any other sap) corresponding to the path to
2 Shut down the ring path
3 Shut down the eth-cfm mep on the ring-path
4 Unconfigure the eth-cfm mep on the ring-path
5 Unconfigure the ring path
Below are the CLI errors popped with some violations to the above guide-lines:
*A:FAD-Chassis# show service
==================================================================
Service Access Points
==================================================================
PortId
-----------------------------------------------------------------
nt-a:xfp:1:300
lag-30:1000
lag-30:1001
nt:vp:1:1000
nt-a:eth:1:0
nt:vp:1:4091
nt-a:xfp:2:40
------------------------------------------------------------------
Number of SAPs : 7
------------------------------------------------------------------
==================================================================
A:FAD-Chassis>configure>eth-cfm# domain 100 format none level 4
*A:FAD-Chassis>configure>eth-cfm>domain# association 1 format string name
"dummy"
*A:FAD-Chassis>configure>eth-cfm>domain>assoc#
*A:FAD-Chassis>configure>eth-cfm>domain>assoc# ccm-interval 100ms
*A:FAD-Chassis>configure>eth-cfm>domain>assoc# exit all
*A:FAD-Chassis# configure eth-ring 10
*A:FAD-Chassis>configure>eth-ring# no shutdown
*A:FAD-Chassis>configure>eth-ring#
*A:FAD-Chassis>configure>eth-ring# path a lag-30 raps-tag 1001
INFO: ERMGR #1004 Already configured - SAP lag-30:1001 already configured
*A:FAD-Chassis>configure>eth-ring# path a lag-30 raps-tag 1002
*A:FAD-Chassis>configure>eth-ring>path# no shutdown
INFO: ERMGR #1001 Not permitted - must configure eth-cfm MEP first
*A:FAD-Chassis>configure>eth-ring>path>eth-cfm# mep 11 domain 100
association 1
*A:FAD-Chassis>configure>eth-ring>path>eth-cfm>mep# exit
*A:FAD-Chassis>configure>eth-ring>path>eth-cfm# exit
*A:FAD-Chassis>configure>eth-ring>path# no shutdown
70
configure all the defects as low-prio-defects for the eth-cfm mep of the
corresponding path.
r-aps tag.
be un-configured
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
sap-using
SvcId Ing.
Fltr
1 none
1000 none
1001 none
2000 none
4091 none
4092 none
10120 none
Egr. Adm Opr
Fltr
none Up Up
none Up Up
none Up Up
none Up Down
none Up Up
none Up Up
none Up Up
Issue: 13