Configuring "Restricted-Tagging" On An Sap - Nokia 7302 Manual

Virtual Private LAN Service
5.8.5.5
When "restricted-tagging" is enabled on an SAP, only double-vlan-tagged packets
arriving at the SAP will be forwarded. Only packets with outer TPID as 0x8100 and
inner TPID 0x8100 are considered as double-vlan-tagged packets.
The following example displays restricted-tagging configuration:
*A:ALA-Dut-B>configure>service>epipe# info
----------------------------------------------
----------------------------------------------
*A:ALA-Dut-B>configure>service>epipe#
To disable restricted-tagging, use the no restricted-tagging command.
*A:ALA-Dut-B>configure>service>epipe# info
----------------------------------------------
----------------------------------------------
*A:ALA-Dut-B>configure>service>epipe#
5.8.5.6
Two steps are required to configure the CFM in a VPLS network:
1 The MD and MA need to be created first
2 The MEP/MIP can be created in the VPLS service instance, associating it to a
210

Configuring "restricted-tagging" on an SAP

description "VPLS service 2100"
sap lt:1/1/1:5 create
description "Sap description for service id 2100"
restricted-tagging
exit
no shutdown
description "VPLS service 2100"
sap lt:1/1/1:5 create
description "Sap description for service id 2100"
no restricted-tagging
exit
no shutdown
Configuring Management Points (MEPs/MIPs) for
Ethernet CFM on SAPs
SAP and added to the defined MD and MA. The MEP has to be specified with the
"Domain" and "Association" IDs that have been configured already under the
configure eth-cfm context (see
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
"Ethernet Connectivity Fault Management").
Issue: 13