Neighbor - Nokia 7302 Manual

Virtual Private Routed Network Service
Table 656
7.10.12.34
Table 657
Table
Table 658
(1 of 2)
594
Show RIP Route Database Output
Label
Destination
Peer
NextHop
Metric
Tag
TTL
Valid

neighbor

neighbor command
Item Description
Syntax neighbor [ip-address | ip-int-name] [detail] [advertised-routes]
Context show>router>rip
Description Displays RIP neighbor interface information.
Parameters ip-address | ip-int-name — Displays information for the specified IP interface.
Default: All neighbor interfaces.
advertised-routes — Displays the routes advertised to RIP neighbors. If no neighbors are
specified, then all routes advertised to all neighbors are displayed. If a specific neighbor is
given then only routes advertised to the given neighbor/interface are displayed.
Default: Display RIP information.
658 describes the standard command output fields for a RIP neighbor.
Show RIP Neighbor Output
Label
Neighbor
Adm
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Description
The RIP destination for the route.
Displays how many seconds the specific route will remain in the routing table.
When an entry reaches 0, it is removed from the routing table.
The router ID of the peer router.
The IP address of the next hop.
The hop count to rate the value of different hops.
The value to distinguish between internal routes (learned by RIP) and external
routes (learned from other protocols).
Displays how many seconds the specific route will remain in the routing table.
When an entry reaches 0, it is removed from the routing table.
No — The route is not valid.
Yes — The route is valid.
Description
The RIP neighbor interface name.
Down — The RIP neighbor interface is administratively down.
Up — The RIP neighbor interface is administratively up.
Issue: 13