Virtual Private LAN Service
To support L2CP protocols running on top of a LAG, m-VPLS SAPs must be created
on the LAG itself.
5.3.2
5.3.2.1
The v-VPLS forwarders emulate the ISAM bridging service in the IHUB. Typical of
bridging, a v-VPLS operates in the context of a VLAN. In general, several v-VPLS will
be configured allowing to support a multi-VLAN environment.
Figure
Figure 14
The v-VPLS can be used for the following functionality:
•
•
A v-VPLS has no operational state. It is configured with an associated customer ID
and VLAN ID, to enable the forwarding of traffic. SAPs are used to associate the
v-VPLS instance with specific residential (user) or regular (network) access ports or
hybrid ports.
160
v-VPLS
v-VPLS usage
14
illustrates the ISAM network topology for an IP VPLS implementation.
ISAM network topology for VPLS
v-VPLS
v-VPLS
Access port
SAP
VLAN
enable L2 forwarding of frames between SAPs (typically between the user side
and the network side); see Figure 15.
extend the reach of a VPRN IP interface (SAP) to several physical ports; see
Figure 16.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Access
port
ISAM
EMAN
VLAN
7450
VPLS/
VPRN
VPLS/
VPRN
7450
Issue: 13