Eth-Ring; Table 47 Sdp-Using Command; Table 48 Show Service Sdp-Using Command Output Fields; Table 49 Eth-Ring Command - Nokia 7302 Manual

Services Overview
Table 47
Table
Table 48
3.17.6.5
Table 49
(1 of 2)
102
sdp-using command
Item Description
Syntax sdp-using [sdp-id[:vc-id] | far-end ip-address]
Context show>service
Description Display services using SDP or far-end address options.
Parameters sdp-id — Displays only services bound to the specified SDP ID.
Values: 1 — 17407
vc-id — The virtual circuit identifier.
Values: 1 — 4294967295
far-end ip-address — Displays only services matching with the specified far-end IP address.
Default: SDPs with any far-end IP address.
48 describes the command output fields.
Show Service SDP-using Command Output Fields
Label Description
Svc ID The service identifier.
Sdp ID The SDP identifier.
Type Type of SDP: Spoke or Mesh.
Far End The far end address of the SDP.
Oper State The operational state of the service.
Ingress Label The label used by the far-end device to send packets to this device in this service by
this SDP.
Egress Label The label used by this device to send packets to the far-end device in this service by
this SDP.

eth-ring

eth-ring command
Item Description
Syntax eth-ring [status]
eth-ring ring-index [path {a|b}]
Context show
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13