Table 692 Sap Command - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
8.7.2.2
Table 692
(1 of 2)
Issue: 13
sap
sap command
Item Description
Syntax sap sap-id
no sap
Context configure>mirror>mirror-dest
Description This command creates a service access point (SAP) within a mirror destination service. It also
associates a predefined SAP within another service ID to a mirror source.
The SAP is defined with port and encapsulation parameters to uniquely identify the (mirror)
SAP on the interface and within the box. The specified SAP must define a FastE, GigE, or
XGigE access port with a dot1q, or null encapsulation type.
The SAP is owned by the mirror destination service ID. If the interface is administratively down,
all SAPs on that interface are also operationally down. A SAP can only be defined on a port
configured as an access port with the mode command at the interface level.
Only one SAP can be created within a mirror-dest service ID. If the defined SAP has not been
created on any service within the system, the SAP is created and the context of the CLI will
change to the newly created SAP.
If the defined SAP exists in the context of the service ID of the mirror-dest service, the CLI
context is changed to the predefined SAP.
If the defined SAP exists in the context of another service ID, mirror-dest or any other type,
an error is generated and the CLI context is not changed from the current context.
Mirror destination SAPs can be created on Ethernet interfaces that have been defined as an
access interface. If the interface is defined as network, the SAP creation returns an error and
the current CLI context is not changed.
An SAP can be also created with encaps-value=0:
•
when encaps-value=0 the mirrored packet is sent as copied
•
when encaps-value <> 0 the mirrored packet is encapsulated in the given VLAN
It is not allowed to create an SAP on top of an LAG as mirror destination.
When the no form of this command is used on a SAP created by a mirror destination service
ID, the SAP with the specified port and encapsulation parameters is deleted. The SAP may not
be deleted until the mirror-dest service ID been shutdown.
Default No default SAP for the mirror destination service defined.
3HH-11985-AAAA-TQZZA
Mirror Services
619