Internet Enhanced Service
6.10.4.9
Table 338
6.10.4.10
Table 339
(1 of 2)
378
protected
protect command
Item
Description
Syntax
[no] protected
Context
configure>service>ies>interface
Description
This command selects the IES interface configuration and the associated configuration for the
interface that enables the interface to be operational (manage access from remote clients).
The command stores the configuration as part of protected configuration when the user issues
the admin software-management IHub database oam-save-protected command.
The [no] protected option de-selects the IES interface. When the user issues the
oam-save-protected command, the IES interface is not saved as part of protected
configuration. It is expected that the user will choose those interfaces that are used for
management access as protected - so that they can be recovered even after default-db
activation.
secondary
secondary command
Item
Description
Syntax
secondary {ip-address/mask | ip-address netmask} [broadcast all-ones | host-ones]
[igp-inhibit]
no secondary {ip-address/mask | ip-address netmask}
Context
configure>service>ies>interface
Description
Use this command to assign up to 255 secondary IP addresses to the interface. Each address
can be configured in an IP address, IP subnet or broadcast address format.
Default
None
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13