Viewing Variable Values And Other System Parameters - Nokia IP500 Series Installation Manual

Flag
-d
-s
-v
-x
Boot-device—The device from which the boot file loads.
Factory default: wd0
Options: wd0 (hard-disk drive unit)

Viewing Variable Values and Other System Parameters

printenv
Use the
the boot manager nonvolatile memory. The command has the following form:
printenv
For example:
BOOTMGR[42]> printenv
Bootmgr Revision: 3.3,base kernel=
3.4.1-FCS16 09.04.2002-192900
autoboot: YES
testboot: NO
bootwait: 0
boot-file:
IP500 Series Installation Guide
All manuals and user guides at all-guides.com
Meaning
Debug mode. Enters the kernel debugger as soon as
possible in the kernel initialization.
Single-user mode. If the console is marked as insecure,
the root password must be entered to access the
manager.
Verbose mode. Verbose during device probing and
thereafter.
Do not identify the flash disk as wd0. This command is
always needed for the IP500 Series appliances and is
automatically entered by the boot manager.
command to view the values of variables currently stored in
printenv
Boot Manager Variables
103