Virtual Private LAN Service
5.16.2.32
Table 156
5.16.2.33
Table 157
270
mfib-table-size
mfib-table-size command
Item
Description
Syntax
mfib-table-size size
no mfib-table-size
Context
configure>service>vpls
Description
This command specifies the maximum number of (s,g) entries in the multicast forwarding
database (MFIB) for the v-VPLS instance.
The mfib-table-size parameter specifies the maximum number of multicast database entries
for both learned and static multicast addresses for the v-VPLS instance. When a table-size limit
is set on the mfib of a service which is lower than the current number of dynamic entries present
in the mfib then the number of entries remains above the limit.
The no form of this command removes the configured maximum MFIB table size.
Default
None.
Parameters
size — The maximum number of (s,g) entries allowed in the Multicast FIB.
Values: 1 — 4096
Note: Refer to mfib size for the actual allowed limitation, see Section 5.8.2.2.
propagate-mac-flush
propagate-mac-flush command
Item
Description
Syntax
[no] propagate-mac-flush
Context
configure>service>vpls
Description
This command specifies whether MAC flush messages received from the given LDP are
propagated to all spoke and mesh SDPs within the context of this VPLS service. The
propagation will follow the split-horizon principle and any data-path blocking in order to avoid
the looping of these messages.
Default
No propagate-mac-flush
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13