Table 502 As-Path-Ignore Command; Table 503 As-Override Command; As-Path-Ignore - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
7.10.9.5
Table 502
7.10.9.6
Table 503
Issue: 13
Item Description
Parameters zero — Specifies that for routes learned without a MED attribute that a zero (0) value is used
in the MED comparison. The routes with the lowest metric are the most preferred.
infinity — Specifies for routes learned without a MED attribute that a value of infinity
(4294967295) is used in the MED comparison. This in effect makes these routes the least
desirable.

as-path-ignore

as-path-ignore command
Item Description
Syntax [no] as-path-ignore
Context configure>service>vprn>bgp
Description This command determines whether the AS path is used to determine the best BGP route.
If this option is present, the AS paths of incoming routes are not used in the route selection
process.
The no form of the command removes the parameter from the configuration.
Default no as-path-ignore
as-override
as-override command
Item Description
Syntax [no] as-override
Context configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
Description This command replaces all instances of the peer's AS number with the local AS number in a
BGP route's AS_PATH.
This command breaks BGP's loop detection mechanism. It should be used carefully.
Default no as-override
3HH-11985-AAAA-TQZZA
Virtual Private Routed Network Service
501