Static-Route - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
7.10.12.39
Table 668
Issue: 13
Label
Nbr Solicitation Tx
Nbr Advertisement Tx
Rtr Advertisement Rx
Nbr Advertisement Rx
Max Advert Interval
Managed Config
Reachable Time
Retransmit Time
Link MTU
Rtr Solicitation Rx
Nbr Solicitation Rx
Min Advert Interval
Other Config
Router Lifetime
Hop Limit

static-route

static-route command
Item Description
Syntax static-route [ip-prefix/mask] | [preference preference] | [next-hop ip-addr] [detail]
Context show>route
Description This command displays the static entries in the routing table.
If no options are present. all static routes are displayed sorted by prefix.
Parameters ip-prefix[/mask] — Displays routes only matching the specified ip-prefix and optional mask.
preference preference — Only displays static routes with the specified route preference.
Values: 0 — 65535
next-hop ip-addr — Only displays static routes with the specified next hop IP address.
detail — Displays detailed information about the static route.
3HH-11985-AAAA-TQZZA
Description
The number of neighbor solicitations sent and time since they were sent.
The number of neighbor advertisements sent and time since they were sent.
The number of router advertisements received and time since they were received.
The number of neighbor advertisements received and time since they were
received.
The maximum interval between sending router advertisement messages.
True — Indicates that DHCPv6 has been configured.
False — Indicates that DHCPv6 is not available for address configuration.
The time, in milliseconds, that a node assumes a neighbor is reachable after
receiving a reachability confirmation.
The time, in milliseconds, between retransmitted neighbor solicitation messages.
The MTU number the nodes use for sending packets on the link.
The number of router solicitations received and time since they were received.
The number of neighbor solicitations received and time since they were received.
The minimum interval between sending ICMPv6 neighbor discovery router
advertisement messages.
True — Indicates there are other stateful configurations.
False — Indicates there are no other stateful configurations.
Displays the router lifetime in seconds.
Displays the current hop limit.
Virtual Private Routed Network Service
601