Table 696 Cpu-Port Command; Table 697 Mirror-Dest Command - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
8.7.3.3
Table 696
8.7.4
8.7.4.1
Table 697
(1 of 2)
Issue: 13
cpu-port
cpu-port command
Item Description
Syntax cpu-port {port-id | lag lag-id} {[egress] [ingress]}
cpu-no port {port-id | lag lag-id} [egress] [ingress]
Context debug>mirror-source
Description This command enables mirroring of traffic ingressing a port that has the CPU as destination or
traffic leaving the CPU and egressing the port.
Default No ports are defined.
Parameters port-id
Specifies the physical port ID in the following format:
<port-id> : <nwport-id | ltport-id>
•
nwport-id - <slot-address>:<port-type>:<port-num>
— slot-address - nt|nt-a|nt-b|ntio-1
— port-type - sfp | xfp |vp | eth | ieee1588 | AI
— port-num - port-number
•
ltport-id - lt:<rack>/<shelf>/<slot>
— lt - keyword
— rack - number identifying the rack
— shelf - number identifying the shelf
— slot - number identifying the slot
lag-id
lag: keyword
Values: 1 — 64
egress - Specifies that packets egressing the port should be mirrored. Egress packets are
mirrored to the mirror destination after egress packet modification.
ingress - Specifies that packets ingressing the port should be mirrored. Ingress packets are
mirrored to the mirror destination prior to ingress packet modification.
Show Commands
mirror-dest
mirror-dest command
Item Description
Syntax mirror-dest service-id
no mirror-dest
3HH-11985-AAAA-TQZZA
Mirror Services
623