Peer - Nokia 7302 Manual

Virtual Private Routed Network Service
(2 of 2)
7.10.12.35
Table 660
Table
Table 661
(1 of 2)
596
Label
Metric In
Metric Out
Split Horizon
Check Zero
Message Size
Preference
Auth. Type
Update Timer
Timeout Timer
Export Policies
Import Policies

peer

peer command
Item Description
Syntax peer [interface-name]
Context show>router>rip
Description Displays RIP peer information.
661 describes the command output fields for a RIP peer.
Show RIP Peer Output
Label
Peer IP Addr
Interface Name
Version
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Description
The metric value added to routes received from a RIP neighbor.
The value added to routes exported into RIP and advertised to RIP neighbors.
Disabled — Split horizon disabled for the neighbor.
Enabled — Split horizon and poison reverse enabled for the neighbor.
Disabled — Checking of the mandatory zero fields in the RIPv1 and RIPv2
specifications are not checked allowing receipt of RIP messages even if
mandatory zero fields are non-zero for the neighbor.
Enabled — checking of the mandatory zero fields in the RIPv1 and RIPv2
specifications and rejecting non-compliant RIP messages is enabled for the
neighbor.
The maximum number of routes per RIP update message.
The preference of RIP routes from the neighbor.
Specifies the authentication type.
The current setting of the RIP update timer value expressed in seconds.
The current RIP timeout timer value expressed in seconds.
The export route policy that is used to determine routes advertised to all peers.
The import route policy that is used to determine which routes are accepted from
RIP neighbors.
Description
The IP address of the peer router.
The peer interface name.
The version of RIP running on the peer.
Issue: 13