Figure 27 Uni-Directional Tunnels - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
Figure 27
Use the following CLI syntax to create a mesh or spoke SDP bindings with a
distributed VPLS service. SDPs must be configured prior to binding. Refer to
Configuring an SDP on page 73 for information about creating SDPs.
Use the following CLI syntax to configure mesh SDP bindings:
configure>service# vpls service-id
Use the following CLI syntax to configure spoke SDP bindings:
configure>service# vpls service-id
Issue: 13
Uni-Directional Tunnels
ALA-1
VPLS 9000
for
Customer 6001
Spoke-SDP 21
Spoke-SDP 22
MTU A
mesh-sdp sdp-id[:vc-id] [vc-type {ether|vlan}]
egress
vc-label egress-vc-label
ingress
vc-label ingress-vc-label
no shutdown
static-mac ieee-address
vlan-vc-tag 0..4094
spoke-sdp sdp-id:vc-id [vc-type {ether|vlan}]
egress
vc-label egress-vc-label
ingress
vc-label ingress-vc-label
3HH-11985-AAAA-TQZZA
MESH-SDP 3
MESH-SDP 4
Spoke-SDP 11
Spoke-SDP 10
VPLS 9000
for
Customer 6001
ALA-3
Spoke-SDP 50
Spoke-SDP 51
MTU B
Virtual Private LAN Service
ALA-2
VPLS 9000
for
Customer 6001
MTU C
215