Internet Enhanced Service
(2 of 2)
6.10.6.2
Table 349
6.10.6.3
Table 350
(1 of 2)
384
Item
Description
Context
configure>service>ies>interface
Description
This command enables the context to configure Internet Control Message Protocol (ICMP)
parameters on an IES service
mask-reply
mask-reply command
Item
Description
Syntax
[no] mask-reply
Context
configure>service>ies>interface>icmp
Description
This command enables responses to Internet Control Message Protocol (ICMP) mask
requests on the router interface.
If a local node sends an ICMP mask request to the router interface, the mask-reply command
configures the router interface to reply to the request.
By default, the router instance will reply to mask requests.
The no form of this command disables replies to ICMP mask requests on the router interface.
Default
mask-reply — Reply to ICMP mask requests.
ttl-expired
ttl-expired command
Item
Description
Syntax
ttl-expired [number seconds]
no ttl-expired
Context
configure>service>ies>interface>icmp
Description
This command configures the rate Internet Control Message Protocol (ICMP) TTL expired
messages are issued by the IP interface.
By default, generation of ICMP TTL expired messages is enabled at a maximum rate of 100
per 10 second time interval.
The no form of this command disables the limiting the rate of TTL expired messages on the
router interface.
Default
ttl-expired 100 10
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13