Table 402 Id Command; Table 403 Interface Command; Table 404 Fdb Command; Clear Commands - Nokia 7302 Manual

Internet Enhanced Service
6.10.10
6.10.10.1
Table 402
6.10.10.2
Table 403
6.10.10.3
Table 404
(1 of 2)
416

Clear Commands

id
id command
Item Description
Syntax id service-id
Context clear>service
clear>service>statistics
Description This command clears parameters for a specific service.
Parameters service-id — The ID that uniquely identifies the service to clear.
interface
interface command
Item Description
Syntax interface [ip-int-name | ip-addr] [icmp]
Context clear>router
Description This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command will
perform the clear operation on all IP interfaces.
Parameters ip-int-name | ip-addr — The IP interface name or IP interface address.
Default: All IP interfaces.
icmp — Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limit.
fdb
fdb command
Item Description
Syntax fdb {all | mac ieee-address | sap sap-id]
Context clear>service>id
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13