Table 512 Export Command; Table 513 Family Command; Export - Nokia 7302 Manual

Virtual Private Routed Network Service
7.10.9.15
Table 512
7.10.9.16
Table 513
506

export

export command
Item Description
Syntax export policy [policy...]
no export
Context configure>service>vprn>bgp
configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
configure>service>vprn>rip
configure>service>vprn>rip>group
configure>service>vprn>rip>group>neighbor
Description This command specifies the export policies to be used to control routes advertised to BGP
neighbors.
When multiple policy names are specified, the policies are evaluated in the order they are
specified. A maximum of five (5) policy names can be configured. The first policy that matches
is applied.
Note that if a non-existent route policy is applied to a VPRN instance, the CLI generates a
warning message. This message is only generated at an interactive CLI session and the route
policy association is made. No warning message is generated when a non-existent route policy
is applied to a VPRN instance in a configuration file or when SNMP is used.
The no form of this command removes all route policy names from the export list.
Default no export — BGP advertises routes from other BGP routes but does not advertise any routes
from other protocols unless directed by an export policy.
Parameters policy — A route policy statement name.
family
family command
Item Description
Syntax family [ipv4][ipv6]
no family
Context configure>service>vprn>bgp
configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
Description This command configures the IP family capability.
Parameters ipv4 — keyword, provisions IPv4 support.
ipv6 — keyword, provisions IPv6 support.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13