FD 100/320Gbps NT and FX NT IHub Services Guide
7 Define BGP parameters (optional).
8 Define RIP parameters (optional).
9 Enable the service.
7.7 Configuring VPRN Components
7.7.1
Use the following CLI syntax to create a VRPN service. A route distinguisher must
be defined in order for VPRN to be operationally active.
CLI syntax:
configure>service# vprn service-id [customer customer-id]
route-distinguisher [ip-address:number1 | asn:number2]
description description-string
no shutdown
The following example displays a VPRN service configuration:
*A:ALA-1>configure>service# info
----------------------------------------------
...
...
----------------------------------------------
*A:ALA-1>configure>service>vprn#
7.7.2
Refer to
VPRN parameters.
The following example displays a VPRN service with configured parameters:
*A:ALA-1>configure>service# info
----------------------------------------------
...
Issue: 13
•
BGP must be enabled in the configure>router>bgp context.
•
RIP must be enabled in the configure>router>rip context.
Creating a VPRN Service
vprn 1 customer 1 create
route-distinguisher 10001:0
no shutdown
exit
Configuring Global VPRN Parameters
"VPRN Services CLI Command Reference"
3HH-11985-AAAA-TQZZA
Virtual Private Routed Network Service
for CLI syntax to configure
427