Canon 1000 Service Manual page 90

3. OPERATION AND TIMING
1. Xmin ..... Stores the coordinate where black changes to white first.
2. Xmax .... Stores the coordinate where white changes to black last.
REF.
3. Ymin ..... Stores the coordinates nearest the start of the main scanning line where black
4. Ymax .... Stores the coordinates farthest from the start of the main scanning line where
The position and the size of an original are automatically identified to enable automatic ratio selection,
automatic paper selection, and image shifts.
If the RF is installed and an original is placed on the copyboard, original position identification
cannot be executed.
d. Mirror Image Processing
< Original >
Main scanning direction
a b c
< Copy >
c
Figure 3-316
e. Input Masking
When light reflected by an original is
separated into three colors by color separation
filters (RGB), it would be ideal if each filter let
through light of a specific range of wavelengths
and blocked out light of other wavelengths.
3-46
COPYRIGHT © 2001 CANON INC.
changes to white.
white changes to black.
b a
Principle
When reading data from the RAM for a single
scan, reading is executed in reverse to create a
mirror image in relation to the main scanning
direction.
Address
12345678..
1 pixel (1 byte)
Writing
100%
400
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Reading
Figure 3-317
B G R
500 600
Wavelength (nm)
Figure 3-318
...nnn
-2-1
700