Canon 1000 Service Manual page 399

Step
5 Remove the lower right cover. (2
mounting screws)
• For a non-200V model, skip this step.
6 Install the pick-up assembly cover
(new). (6 mounting screws)
At this time, move the cable to A.
• For a non-200V model, skip this step.
7 Remove the rear right small cover from
the rear right cover. (2 mounting
screws)
• For a non-200V model, skip this step.
COPYRIGHT © 2001 CANON INC.
Work
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Lower right cover
Screws
Cable
Pick-up assembly cover (new)
Screws
Rear right
cover
Screws
5. INSTALLATION
[A]
Screws
Rear right small
cover
5-25