Removing The Duplexing Feeding Roller 1; Removing The Duplexing Feeding Roller 2 - Canon 1000 Service Manual

10. Removing the Duplexing Feeding
Roller 1
1) Remove the pick-up assembly.
2) Remove the screw [1], and remove the pick-
up roller arm bushing [2].
3) Removing the E-ring [3] (resin)
[3]
Figure 4-320B
4) Pull out the feeding roller [5] together with the
belt [4].
[4]
[5]
Figure 4-321B
COPYRIGHT © 2001 CANON INC.
[1]
[2]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
When installing the feeding roller [1]
to the pick-up assembly, install it so
that the gear [2] on the feeding roller
is toward the rear of the machine.
[2]
[1]
Figure 4-322B
11. Removing the Duplexing Feeding
Roller 2
1) Remove the pick-up assembly, and open the
pick-up assembly cover.
2) Remove the screw [1], and remove rhe
positioning pin [2]
3) Remove the registration roller [2] inlet guide
[3].
Figure 4-323B
Front of machine
[3]
[2]
[1]
4-33