Removing The Eco Board; Removing The Analog Processor - Canon 1000 Service Manual

10. Removing the ECO Board

1) Remove the reader controller.
2) Disconnect all the connectors from the ECO
board, and remove the six screws [1]; then,
remove the ECO board [2].
[1] [2]
Figure 4-1101-10

11. Removing the Analog Processor

1) Remove the two fixing screws [1], and fix the
digital unit [2] in place as indicated.
[2]
[1]
Figure 4-1101-11 (fixing screw position)
COPYRIGHT © 2001 CANON INC.
[1]
[1]
[1]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
Figure 4-1102-11 (fixing position)
2) Remove the four screws [3], and remove the
reader controller cover [4].
[4]
[3]
Figure 4-1103-11
3) Remove the two screws [6], and remove the
cable retainer [5]; then, disconnect the
connector J1453 [7].
[7]
[6]
Figure 4-1104-11
[3]
[3]
[5] [6]
4-111