Hopper System - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
5) Mark the position of the unit support plate [6].
Figure 4-623B
6) Remove the screw [7], and disconnect the
connector [8]; then, remove the BD unit [9].
[7]
[9]
Figure 4-624B
4-70
COPYRIGHT © 2001 CANON INC.
[6]
[8]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
• Y/M BD Unit
1) Lift the hopper assembly (See chapter 4. VII.
HOPPER SYSTEM, A-1. Removing the
Hopper Assembly).
2) Remove one screw each [1], and remove the
unit cover [2] from the front.
[1]
[2]
Figure 4-625B
3) Mark the position of the unit support plate [3].
[3]
Figure 4-626B