Canon 1000 Service Manual page 384

5. INSTALLATION
Step
13 Install the two process unit grips that
come with the machine.
14 Slide out the process unit.
15 Remove the mounting screw, and
remove the four photosensitive drum
cleaner locking rolls.
Push the center of the blade
(indicated by an arrow) with
a finger to release the pres-
sure on the roll.
Store away the screw and locking rolls.
Do not remove the protection
sheet from the drum.
5-10
COPYRIGHT © 2001 CANON INC.
Work
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Mounting screw
Locking roll
Grip
Process unit