Canon 1000 Service Manual page 715

Details of MTR
No.
1 M10 (pick-up motor)
(Note 1)
2 M21 (photosensitive drum motor)
(Note 1)
3 M8 (laser scanner motor)
(Note 1)
4 M20 (waste toner feeding motor)
(Note 1)
5 M18Y, M18M, M18C, M18Bk (Y/M/C/K
developing motor) (Note 1)
6 M9 (fixing motor)
(Note 1)
7 M14 (transfer belt motor)
(Note 1)
8 M11 (pre-fixing feeding motor)
(Note 1)
9 Buffer path unit motor
(Note 1)
10 M19 (duplexing unit feeding motor)
(Note 1)
11 M15 (polishing/oil removing motor)
(Note 1)
12 M24Y, M24M, M24C, M24Bk (primary wire
cleaning motor)
13 Fixing web motor
Note 1:
Its operation stops in response to a press on the Stop key.
COPYRIGHT © 2001 CANON INC.
Motor
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
Operates for 10 sec, stops for 3 sec, and then
operates for 10 sec and stops.
Operates for 10 sec, stops for 3 sec, and then
operates for 10 sec and stops.
Operates for 10 sec, stops for 3 sec, and then
operates for 10 sec and stops.
Operates for 10 sec, stops for 3 sec, and then
operates for 10 sec and stops.
Operates for 10 sec, stops for 3 sec, and then
operates for 10 sec and stops.
Rotates for 10 sec at standard speed (138 mm/
sec) for plain paper (64 to 104 g), for 10 sec at
standard speed (90 mm/sec) for thick paper (157
g), for 10 sec at standard speed (68 mm/sec) for
ultra thick paper (209 g), for 10 sec at gloss
speed (45 mm/sec) for extra thick paper (209 g),
and stops for 3 sec.
Operates for an equivalent of 2 rotations of the
belt and stops for 3 sec; then, operates for an
equivalent of 2 rotations, and stops.
Rotates for 10 sec at standard speed (138 mm/
sec) for plain paper (64 to 104 g), for 10 sec at
standard speed (90 mm/sec) for thick paper (157
g), for 10 sec at standard speed (68 mm/sec) for
ultra thick paper (209 g), for 10 sec at gloss
speed (45 mm/sec) for extra thick paper (209 g),
and stops for 3 sec.
Rotates for 10 sec at standard speed (138 mm/
sec) for plain paper (64 to 104 g), for 10 sec at
standard speed (90 mm/sec) for thick paper (157
g), for 10 sec at standard speed (68 mm/sec) for
ultra thick paper (209 g), for 10 sec at gloss
speed (45 mm/sec) for extra thick paper (209 g),
and stops for 3 sec.
Operates for 10 sec, stops for 3 sec, and then
operates for 10 sec and stops.
Rotates CCW/CW for 10 sec, stops for 3 sec,
rotates CCW for 10, and then stops.
Cleans by a single back-and-forth trip.
Operates for 5 sec and then stops.
Control
7-279