Removing The Transfer High-Voltage Transformer - Canon 1000 Service Manual

19. Removing the Transfer High-
Voltage Transformer
1) Open the transfer assembly (See chapter 4.
IV. TRANSFER UNIT, A-2. Opening the
Transfer Belt Assembly).
2) Remove the screw, and remove the transfer
high-voltage transformer insulating cover [2];
then, remove the two screws [3].
[1]
[2]
Figure 4-1101-17
3) Disconnect the five connectors [4] from the
transfer high-voltage transformer.
Figure 4-1102-17
COPYRIGHT © 2001 CANON INC.
[3]
[4]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
4) Slide out the transfer high-voltage transformer
[5] to the right; at this time, take care so that
the transfer high-voltage transformer will not
touch the transfer belt.
[5]
Figure 4-1103-17
5) Disconnect the two connectors [6], and
remove the grounding wire [7]; then, remove
the transfer high-voltage transformer [5].
[5]
Figure 4-1104-17
[6]
[7]
4-117