H-2.Installing The Paper Deck-H1 - Canon 1000 Service Manual

H-2. Installing the Paper Deck-H1
• See "H-1. Installing the Paper Deck" frpm step 1) to 21).
Step
22 Enter '2' for DECK-SET
Press DECK-P
the paper used by the user.
If a diffferent paper size is desired, perform
the following:
At time of shipment from the factory, the
paper size is set to A3 extra-length or A3
(A4)/11x17 (LTR) with an attachment
installed (12x18).
• To switch to B4
• To use exclusively for A3/11x17
23 Open the paper deck cover.
24 Remove the attachment from the front
and the rear of the deck lifter assembly.
25 Remove the four screws, and
disconnect the connector; then, heater.
26 Remove the four screws used to secure
the side guide plates (rear, front) in
place; then, shift the side guide plate.
COPYRIGHT © 2001 CANON INC.
Work
.
to select the size of
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Paper deck
heater
Screws
Screws
5. INSTALLATION
Attachment
Connector
5-31