Canon 1000 Service Manual page 414

5. INSTALLATION
Step
7 Remove the control panel relay
connector and the two control card
connectors; free the harness for the
control card from the wire saddles
behind the control panel; then, turn over
the control panel.
8 Remove the 13 screws, and remove the
control panel back cover.
9 Remove the mounting screw from the
face plate; then, disengage the claw to
remove the face plate from the card
slot.
10 Install the insulating sheet over the
display window for the control card on
the control panel.
11 Peel the protection sheet from the
control card.
5-40
COPYRIGHT © 2001 CANON INC.
Work
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Wire saddles
Control panel relay
connector
Screws
Screws
Claws
Control card connector
Screws
Screws
Face plate