Removing The Lower Fixing Roller; Removing The Fixing Thermistor; (Upper) Method 1 - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
4) While shifting the bearing at the front of the
upper fixing roller, remove the upper fixing
roller.

6. Removing the Lower Fixing Roller

1) Open the upper fixing roller (See chapter 4. X.
FIXING SYSTEM, A-2. Opening the Upper
Fixing Roller Unit).
2) Remove the lower fixing heater (See chapter
4. X. FIXING SYSTEM, A-4. Removing the
Lower Fixing Heater).
3) Remove the lower fixing roller metal fixing [1]
(one each from front and rear).
4) While shifting the bearing (front, rear) of the
lower fixing roller, remove the lower fixing
roller [3].
[3]
Figure 4-1011A
4-98
COPYRIGHT © 2001 CANON INC.
[2]
[1]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)

7. Removing the Fixing Thermistor

(upper) Method 1

1) Open the upper fixing roller unit (See chapter
4. X. FIXING SYSTEM, A-2. Opening the
Upper Fixing Roller Unit).
2) Remove the two fixing thermistor metal fixings
[1].
[2]
Figure 4-1012A
3) Free the cord of the thermistor from the cord
clamp [2].
4) Disconnect the connector, and remove the
fixing thermistor (upper).
[1]