Canon 1000 Service Manual page 198

3. OPERATION AND TIMING
3. Changing the Paper Path in the Duplexing Feeding Assembly
The paper path in the duplexing feeding assembly is changed to suit the size of paper (default sizes) in
two-sided copying.
A path may be any of four created by three paper deflecting plates.
Each paper deflecting plate is driven by its own solenoid (Table 3-607).
The CLC1000's two-sided copying mode does not accommodate A5 size, and the paper de-
flecting plate found on the farthest right of Figure 3-624 is not used.
Ref.
[1]
[2]
[3]
[4]
3-154
COPYRIGHT © 2001 CANON INC.
Paper size
279 mm x 432 mm (11''17'')
A3
B4
LGL
A4R
LTR-R
LTR
A4
B5R/B5
Table 3-607
SL11L SL11R
[1] [2]
Figure 3-624
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Paper deflecting plate solenoid
SL11L SL11L
ON OFF
OFF ON
OFF OFF
OFF OFF
SL11S
[3] [4]
SL11L
OFF
OFF
ON
OFF