Canon 1000 Service Manual page 270

4. MECHANICAL SYSTEM
4) Move the No. 2 mirror mount so that the pulley
shaft [1] of the No. 2 mirror mount is visible
through the long hole [2] in the side plate.
[2]
Figure 4-204D (rear)
[1]
Figure 4-205D (front)
6) Route the scanner cable on the pulleys and hooks as indicated in Figure 4-207D.
[2]
4-16
COPYRIGHT © 2001 CANON INC.
[1]
[2]
[6]
Figure 4-207D
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
5) Fit the binding screw [3] (M4x8) to the pulley
shaft [4] so that the pulley may be temporarily
fixed to the side plates [5] found at the front
and the rear of the pulley, thereby temporarily
fixing the No. 2 mirror mount in place.
[5]
[4]
[3]
Figure 4-206D
[3]
Fix in place temporarily.
[5]
[4]
[3]
[4]
[5]
[1]
Put the steel ball
into the hole.
Wind 8 times.
[8]