Canon 1000 Service Manual page 336

4. MECHANICAL SYSTEM
3) While holding the grips [3], lift the developing
assembly/cleaning unit [4] about 5 cm; then,
shift it to the rear to remove.
[3]
Figure 4-909A
Points to Note after Removing the
Developing Assembly/Cleaner Unit
• Be sure to spread paper under it to prevent
soiling with toner.
• Do not move a unit over units of different
colors.
4-82
COPYRIGHT © 2001 CANON INC.
[4]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)