Canon 1000 Service Manual page 229

7. Controlling the Fixing Speed
a. Fixing Speed
The CLC1000 controls the fixing speed to any of the six settings as shown in Table 3-611 to ensure
proper fixing independent of different copying modes.
In addition, the CLC1000 is capable of varying the fixing speed to produce a degree of shine on copies
to suit the preferences of the user.
A higher fixing speed decreases the shine on copies, providing a matt effect; on the other hand, a lower
fixing speed increases the shine on copies, providing a glossy effect.
One-sided/
Source of paper
two-sided
Cassette/paper
One-sided
deck
Two-sided
Duplexing unit
(2nd side)
One-sided/
Multifeeder two-sided
(2nd side)
COPYRIGHT © 2001 CANON INC.
Type of paper
Thin paper
2
(64 to 79 g/m )
Plain paper
2
(80 to 105 g/m )
Transparency
Plain paper
(105 g)
Thin paper
2
(64 to 79 g/m )
Plain paper
2
(80 to 105 g/m )
Thick paper
(106 to 157 g)
Thick paper
(158 to 209 g)
Transparency
Table 3-611
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Continuous/
single copying
Single copying
Continuous
copying
Continuous/
single copying
Continuous/
single copying
Continuous/
single copying
Continuous/
single copying
Continuous/
single copying
Continuous/
single copying
3. OPERATION AND TIMING
Fixing speed
Shine
(mm/sec)
Matte 160
Standard 145
Glossy 90
Matte 160
Standard 140
Glossy 90
Standard 70
Standard 140
Glossy 90
Standard 140
Glossy 90
Standard 90
Glossy 70
Standard 70
Glossy 45
Standard 70
3-185