Removing The Primary High-Voltage Transformer; Removing The Dc Power Supply Pcb - Canon 1000 Service Manual

6. Removing the Primary High-
Voltage Transformer
1) Remove the rear cover 1/2.
2) Remove the two screws each [1], and remove
the grounding wire [2]; then, remove the
primary high-voltage transformer [3].
[1]
[2]
[3]
Figure 4-1101-6
[1]
[4]
Figure 4-1102-6
COPYRIGHT © 2001 CANON INC.
[3]
[1]
[4]
[2]
[3]
[1]
[3]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
7. Removing the DC Power Supply
PCB
1) Slide out the cassette 1/2, and remove the
four screws [1] to remove the waste toner
cover [2].
[2]
[1]
Figure 4-1101-7
2) Disconnect the two connectors [3].
Figure 4-1102-7
[1]
[3]
4-109