Canon 1000 Service Manual page 663

Adjusting the Image Read Start Position
You must check the point of retention (FUNC>
ATTRACT) before making the following adjust-
ments:
1) Before starting service mode, turn OFF the
original detection mechanism.
2) Select the <ADJ-XY> screen, and press the
Start key.
• The appropriate copying modes will be set au-
tomatically, and a copy will be made with a shift
of about 20 mm as shown in Figure 7-704.
3) If any part of the image is missing, decrease
the values of 'ADJ-X' and 'ADJ-Y'.
4) If an area outside the image is copied, increase
the values of 'ADJ-X' and 'ADJ-Y'.
COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
ADJ - Y 20
20
ADJ
Figure 7-704
X
-
7-227