Canon 1000 Service Manual page 277

[1]
[2]
Figure 4-309A
5) Remove the resin E-ring [4] and the bushing
[5]; then, remove the pick-up roller shaft [6]
toward the rear.
[4] [5]
Figure 4-310A
6) Remove the mounting screw [7], and remove
the separation roller assembly cover [8].
Figure 4-311A
COPYRIGHT © 2001 CANON INC.
[6]
[8]
[7]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
7) Remove the resin E-ring [9].
8) While pushing down the separation roller
assembly [10], remove the timing belt [11],
and remove the pick-up/feeding roller
assembly [12].
[9]
[12]
[10]
Figure 4-312A
Orientation of the Pick-Up/Feeding Roller
The pick-up/feeding roller rotates in a specific
direction.
When installing the pick-up/feeding roller,
install it so that the marking shown in Figure 4-
313A is toward the rear of the machine.
Markings
Bearing
(one-way)
Figure 4-313A
[11]
Rear of
machine
4-23