Keeping The Hopper Assembly From Tumbling Down; Removing The Hoppers - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
2. Keeping the Hopper Assembly
from Tumbling Down
1) Remove the hopper lower front cover, and
keep a screwdriver through the hole [1] as
shown in Figure 4-709A to keep the hopper
assembly from tumbling down.
Figure 4-710A
4-74
COPYRIGHT © 2001 CANON INC.

3. Removing the Hoppers

1)
2)
3)
[1]
[2]
[1]
4)
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remove the hopper assembly.
Remove the hopper lower front cover, and
keep a screwdriver through the hole (See
chapter 4. VII. HOPPER SYSTEM, A-2.
Keeping the Hopper Assembly from Tumbling
Down).
Remove the five screws [1], and remove the
hopper top unit cover [2].
Figure 4-711A
In the case of Y/M/C hopper, remove the
screw [3] and E-ring [4], and disconnect the
two connectors [5] for each color; then,
remove two screws [6] at the back.
[3]
[4]
[5]
Figure 4-712A
[1]
[5]