Highvoltage Transformer; Removing The Developing Bias High-Voltage Transformer - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
4. Removing the Separation High-
Voltage Transformer Unit
1) Remove the rear covers 1 and 2.
2) Remove the fixing screws, and open the DC
controller assembly.
3) Disconnect the three connectors [1], and
remove the two screws [2]; then, remove the
screw [3], and remove the grounding wire to
remove the separation
transformer [4].
[2]
[1]
[4]
[2]
Figure 4-1101-4
5. Removing the Developing Bias
High-Voltage Transformer
1) Remove the rear cover 1/2/3.
2) Disconnect the four connectors [1], and
remove the four screws [2]; then, remove the
power supply cooling fan unit [3].
[1]
[2]
Figure 4-1101-5
4-108
COPYRIGHT © 2001 CANON INC.
high-voltage
[3]
[1]
[1]
[2]
[3]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
3) Remove the two screws [4] and twelve
connectors [5], and remove the developing
bias high-voltage transformer unit [6] with
lifting up.
[5]
[5]
[5]
[5]
[4]
Figure 4-1102-5
[5]
[4]
[5]
[5]
[6]