Before You Begin Configuring; Important Information About Controllers And Protocols - Honeywell ACUIX Installation And Configuration Manual

Before You Begin Configuring

Important Information about Controllers and Protocols

Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Complete the following before configuring your ACUIX dome:
• Important Information about Controllers and
• Step 1: Prepare the Controller and Monitor for
• Step 2: Turn on the Dome and Find the Mechanical
• Step 3: (Optional) Learn about the HJZTP Joystick
• Step 4: Learn How to Use the Special
• Step 5: Open the OSD Menu and Start
The ACUIX is compatible with the following controllers and protocols:
• HJZTP controller using the VCL, MAXPRO-mode or Diamond protocols
• HMAX082/HMAX162 Matrix Switcher and HKJMMTP controller using VCL UTP / coax
control protocol
• Pelco P and Pelco D third party protocols and controllers
• HEGS5000/5001 controller with Diamond protocol
• IntelliBus™ protocol
In general, protocols allow cross compatibility between products and manufacturers.
Because the ACUIX™ dome is designed to work with a variety of controllers, Digital Video
Recorders (DVRs) and other hardware, deciding what protocol to use when setting up a
system is challenging. It is also not possible to describe all the tasks using all combinations
of protocols and hardware. Therefore, this guide is a supplement to the hardware users
guides and are based on the use of the Honeywell HJZTP joystick controller.
Protocols, page 63
Use, page 64
Home, page
Controller, page
Presets, page 67
Configuring, page 69
64
65
63