Step 3: Install The Mount, Adapter Or Bracket; In-Ceiling Housing; Figure 3-6 Circuit Board Address Switches Sw1 To Sw4; Table 3-7 Address Switch Assignments - Honeywell ACUIX Installation And Configuration Manual

Step 3: Install the Mount, Adapter or Bracket

In-Ceiling Housing

Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Note If the dome is set to address 0000, it responds to control commands for any
address. For example, if an operator sends control commands to address
0002, the dome that has the address 0000 performs the same commands.
Figure 3-6 Circuit Board Address Switches SW1 to SW4
Table 3-7 Address Switch Assignments
Address
SW1
SW2
SW3
SW4
Note All the mounting hardware and field wiring is supplied by the installer.
This step is part of Step 4: Install the
Value
Units digit
Tens digit
Hundreds digit
Thousands digit
Housing, page 50.
43