Configuration
Task/Action (with Default)
Turning the Start Up State Restore ON or OFF
1.
Select 3 Control Options
Pan Offset
7 Startup State Restore
2.
Select
•
OFF (default).
•
ON to set the dome to return to the state of operation at the
last loss of power.
If you selected ON, the message Extreme Caution: This
3.
will move the dome to previous shutdown
position on startup... displays.
Select Y (yes) to continue or N (no) to cancel.
Displaying Pan and Tilt Coordinates
1.
Select 4 Diagnostic Options
2.
Select ON to display the pan (azimuth) and tilt
(elevation/declination) along the bottom of the monitor or OFF
(default).
Configuring the Image Quality and Video Display Settings
80
4 Set Pan and Tilt Options
1 Coordinates
Note
The Camera Options menu is highly variable and camera model dependent.
Caution
Only qualified technical personnel should use the Camera Options menu
to change configurations as these changes can make the recorded images
unusable.
Note
Remember you access the OSD by pressing 90
Notes
6
Preset.