Table 3-2 Typical Dip Switch Settings By Protocol - Honeywell ACUIX Installation And Configuration Manual

Protocol Baud and Parity
Description
Intellibus™ 38400 baud, no parity
MAXPRO* 9600 baud, even parity*
VCL - RS485 9600 baud, no parity
VCL UTC 9600 baud, no parity
Diamond 9600 baud, even parity
Pelco P 4800 baud, no parity
(default for P-type control)
Pelco D 2400 baud, no parity
(default for D-type control)
Pelco P_AD 4800 baud, no parity
default for P-type control
Pelco D_AD 2400 baud, no parity
default for D-type control
* defaults
Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Table 3-2 Typical DIP Switch Settings by Protocol
SW6 - Baud and Parity Settings
1 2 3 4
OFF ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON
OFF OFF ON OFF ON
OFF OFF ON OFF OFF OFF OFF OFF ON
OFF OFF ON OFF OFF OFF OFF OFF OFF OFF ON
OFF OFF ON OFF ON
ON ON OFF OFF OFF OFF OFF OFF ON
OFF ON OFF OFF OFF OFF OFF OFF OFF ON
ON ON OFF OFF OFF OFF OFF OFF ON
OFF ON OFF OFF OFF OFF OFF OFF OFF ON
5 6 7 8 1 2
OFF OFF OFF OFF ON
ON
OFF OFF OFF ON OFF OFF OFF OFF OFF OFF ON
OFF ON
OFF ON
SW5 - Protocol Settings
3 4 5 6 7 8
OFF OFF OFF OFF OFF ON
OFF OFF OFF OFF OFF ON
OFF OFF OFF OFF ON
OFF OFF OFF OFF ON
ON OFF OFF OFF OFF ON
OFF ON OFF OFF ON
ON OFF ON OFF OFF ON
35