Setting The Time; Setting The Date - Honeywell ACUIX Installation And Configuration Manual

Task/Action (with Default)

Setting the Time

1. Select 7 Enhanced Features

4 Change Time
2. Enter the new time in HH:MM:SS (hours:minutes:seconds)
format.
The time must be entered in 24-hour format.
3. Press Enter to change to the new time or press ESC to leave
the time as originally displayed.

Setting the Date

1. Select 7 Enhanced Features

4 Change Date
2. Enter the new date in YYYY-MM-DD (year-month-day) format.
3. Press Enter to change to the new date or press ESC to leave
the date as originally displayed.
Display Options Notes
(1) Applies to the numerical number assigned to each dome (displays on the monitor as CAM) during installation
using the address switches on the scan assembly. To name and position the text on the display see
Dome Name Location on page 76.
(2) Applies to the user assigned alpha-numeric name you can assign to each dome. The dome may also have a
number assigned during installation when the address switch settings are assigned.
Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide

5 Time and Date Settings

5 Time and Date Settings
Notes


Changing
77