Logging In And Viewing Live Video; Logging In To The Camera Via The Web Client; Before You Begin; Logging In To The Camera - Honeywell Performance Series User Manual

Logging In and Viewing Live Video

This chapter contains the following sections:
•
•
•
•

Logging In to the Camera via the Web Client

Using the web client, you can monitor live video, play back recorded video, and configure
camera settings.

Before You Begin

Before logging in to the web client, ensure that the following conditions are met:
•
•
•

Logging In to the Camera

1.
2.
Logging In to the Camera via the Web Client, page 19
Using the Live Interface, page 21
Setting Up Live Video Streaming, page 24
Logging Out, page 24
The camera is properly connected to the network.
The camera's IP address and the PC's IP address are in the same network segment. If
there is a router, set the corresponding gateway and subnet mask.
A network connection has been established. To verify the connection, ping the camera's
IP address. (Enter "ping [IP address]").
Open Internet Explorer, enter the camera's IP address in the address bar, and then
press Enter. For example, if your camera's IP address is 192.168.1.108, you would type
http://192.168.1.108.
On the login screen, enter the admin user name and password, and then click Login.
The default user name is admin (case-sensitive) and the default password is 1234.
2
2
800-23288 - A - 07/2017