Step 7: Install The Lower Dome Onto The Housing; Installing The In-Ceiling Lower Dome; Installing The Indoor Or Outdoor Pendant Lower Dome; Figure 3-22 In-Ceiling Housing Lanyard Bracket - Honeywell ACUIX Installation And Configuration Manual

Step 7: Install the Lower Dome onto the Housing

Installing the In-Ceiling Lower Dome

Installing the Indoor or Outdoor Pendant Lower Dome

Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
1.Clip the lanyard to the mounting post inside the housing.
2. Align the lower dome tab hooks with the three mounting posts on the housing.
3. Twist to lock the lower dome into the housing.
4. If applicable, continue the next steps to configure the dome.
Figure 3-22 In-ceiling Housing Lanyard Bracket
1. Clip the lower dome lanyard to the housing bracket.
2. Confirm that the o-ring is in place around the lower dome and press the lower dome
into the housing
3. Tighten the screws to secure the lower dome to the housing.
4. If applicable, continue the next steps to configure the dome.
Clip the lanyard from the lower
dome to the bracket inside the
housing
59