Changing Dome (Camera) Name/Msg Loc (Location); Displaying Crosshairs; Setting A Dome Name; Displaying A Dome Name - Honeywell ACUIX Installation And Configuration Manual

Configuration
Task/Action (with Default)

Changing Dome (Camera) Name/Msg Loc (Location)

Select 2 Display Options
Depending on the protocol, use either arrows or the joystick to move
the text up or down the monitor to position as required.

Displaying Crosshairs

Select 2 Display Options

Setting a Dome Name

Select 2 Display Options

Name enter a 24-alphanumeric name for the dome. Depending on
the protocol, use either arrows or the joystick to scroll the number
and letter choices.

Displaying a Dome Name

Select 2 Display Options

Dome Name ON or OFF (default).

Changing Dome Name Location

Select 2 Display Options

Dome Name Location
arrows or the joystick to move the text up or down the monitor to
position as required. The default is top left.

Displaying the Time

1. Select 7 Enhanced Features

1 Display Time
2. Select ON to display the time at the lower left center of the
monitor in HH:MM:SS (24 hour format) or AM/PM (12-hour
format) or OFF (default).

Displaying the Date

1. Select 7 Enhanced Features

2 Display Date
2. Select ON to display the time at the lower right center of the
monitor in DD-MMM-YYYY format or OFF (default).

Setting the Time Format to Display

1. Select 7 Enhanced Features

3 Time Format
2. Select 24 hours (default) to display the time as HH:MM:SS or
12 Hours to display the time with AM or PM.
76

6 Change Camera Name Loc
 
8 Crosshairs ON or OFF (default).

9 Dome Name Settings

9 Dome Name Settings

9 Dome Name Settings
Depending on the protocol, use either

5 Time and Date Settings

5 Time and Date Settings

5 Time and Date Settings
Notes

See Note 1
Useful with pan offset.

1 Set Dome See Note 2

2 Display See Note 2

3 Change See Note 2



page 77.
page 77.
page 77.
page 77.