System Administration and Equipment Handling
Changing a 4-Digit User or Privacy Zone Login PIN
Recovering an Encrypted User or Privacy Zone Login PIN
Resetting a Privacy Zone Password (Diamond or IntelliBus Only)
108
1.
Press 75
Preset.
2.
Enter the 4-digit PIN. The default is 1000.
3.
Select 2 Change PIN.
4.
Enter a new PIN.
5.
Re-enter the PIN to verify as above.
If you enter the wrong 4-digit number, Invalid PIN, try again displays and the
dome returns to the Enter PIN screen.
If you entered the correct PIN, PIN changed displays and the Password Settings
menu opens.
1.
Press 75
Preset.
An encrypted PIN number displays on the monitor.
2.
Write down the number.
3.
Contact Honeywell Technical Support to recover the actual PIN.
Note
Up to a 24-alphanumeric characters can be programmed as a password. The
default password is a blank line.
1.
Press 75
Preset
2.
Select 3 Reset Privacyzone Password.
The password is reset to the factory default password, which is blank. To enter a
blank password, press Enter at the password prompt.
enter the current alphanumeric password.