Installation; Installation Warnings And Cautions - Honeywell ACUIX Installation And Configuration Manual

Installation

Installation Warnings and Cautions

Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Note Review Installation
In this section:
• Installation Warnings and
• DIP Switch Default Settings and
• Step 1: Set the Switches on the Housing Interface
• Step 2: Set the Switches on the Scan Assembly Circuit
• Step 3: Install the Mount, Adapter or
• Step 4: Install the Housing, page
• Step 5: Connect the Field and Terminal Block
• Step 6: Install the Scan Assembly into the
• Step 7: Install the Lower Dome onto the
• Step 8: Configure the Dome, page
WARNING! All installations must be performed by qualified technical
personnel and must be in accordance with all national and
local mechanical and electrical codes.
Ensure the mounting surface and installation hardware can
hold the combined weight of the scan assembly, housing,
lower dome and mount.
To prevent damage to the interface board, follow standard
industry precautions for electrostatic discharge-sensitive
devices.
Preparation, page 27 before continuing.
Cautions, page 33
Locations, page 34
Board, page
Bracket, page 43
50
Wiring, page
Housing, page
Housing, page
61
3
36
Board, page 40
54
58
59
33